Publicação
Mass transfer from cylinders and plane surfaces buried in packed beds in alignment with the flow direction
| Resumo: | The present work describes the mass transfer process between a moving fluid and a slightly soluble cylinder buried in a packed bed, in alignment with the direction of flow. The bed of inert particles is taken to have uniform voidage. Numerical solution of the partial differential equation (PDE) describing mass conservation of the solute gave the concentration field near the soluble surface and the mass transfer flux was integrated to give values of the Sherwood number as a function of the relevant parameters. A mathematical expression is proposed (given as Eq. (32) in the paper) that describes accurately the dependence found numerically between the value of the Sherwood number and the values of Peclet number and aspect ratio, L/d(1), of the cylinder. For large enough diameter of the cylinder, the problem degenerates into mass transfer from a plane surface and the same equation applies, with L/d(1) = 0. The equation was tested through the measurement of diffusivity for different solutes released by slightly soluble solids, and the experimental values obtained were in excellent agreement with the values found in literature. An important feature of the paper is the detailed discussion of the finite difference method adopted, with emphasis on the high-resolution schemes used in the discretisation of the convection term of the PDE. |
|---|---|
| Assunto: | Chemical engineering Engenharia química |
| País: | Portugal |
| Tipo de documento: | journal article |
| Tipo de acesso: | Restrito |
| Instituição associada: | Repositório Aberto da Universidade do Porto |
| Idioma: | inglês |
| Origem: | Repositório Aberto da Universidade do Porto |
Registos relacionados
Treatment of textile effluents by the heterogeneous Fenton process in a continuous packed-bed reactor using Fe/activated carbon as catalyst
pH infuence on oxygen mass transfer coeficient in a bubble column. Individual characterisation of kL and a
Diffusion cloud around and downstream of active sphere immersed in granular bed through which fluid flows
Direct CO2 hydrogenation to methane or methanol from post-combustion exhaust streams - A thermodynamic study
Tailoring the Ti surface via electropolishing nanopatterning as a route to obtain highly ordered TiO2 nanotubes
Ceria Nanoparticles Shape Effects on the Structural Defects and Surface Chemistry: Implications in CO oxidation by CuO/CeO2 oxides
Biodiesel production from vegetable frying oil and ethanol using enzymatic catalysis
1-Octanol/water partition coefficients of n-Alkanes from molecular simulations of absolute solvation free energies
Effect of the integration method on the accuracy and computational efficiency of free energy calculations using thermodynamic integration
Methanol steam reforming for hydrogen generation via conventional and membrane reactors: A review
Boehmite-Phenolic Resin Carbon Molecular Sieve Membranes - Permeation and Adsorption Studies
Composite Grapheno-Metal Oxide Platelet Method of Preparation and Applications
Production of C4 Dicarboxylic Acids From Lignin Oxidation
Laccase immobilization over multi-walled carbon nanotubes: Kinetic, thermodynamic and stability studies
Removal of organic and inorganic pollutants from water in continuous catalytic systems
Publicado em: (2028)
Publicado em: (2028)
Numerical simulation study on the heat loss from a thermal foot manikin
Development of a microalgae-bacteria system to remove emerging contaminants from wastewater
Publicado em: (2028)
Publicado em: (2028)
From Research to Reality: Optimizing Scale-up of Tire Cord Fabric Technology
Publicado em: (2030)
Publicado em: (2030)
Discovery of target directed drugs for neurodegenerative diseases based on benzopyrone scaffold
Protein Separation and Purification by Cyclic Adsorption Processes
Publicado em: (2026)
Publicado em: (2026)
Cluster Analysis of Crude Oils for Refining and Quality Control based on Physicochemical Properties, Proton Nuclear Magnetic Resonance and Gas Chromatography
Publicado em: (2025)
Publicado em: (2025)
Rehabilitation Project for an Energy Autonomous House
Decyl acetate synthesis by enzyme catalysis in scCO2 (Keynote Presentation)
Study of Mechanical and Thermal Properties of Rubberised and Dipped Tire Cords
Use of Electrochemical Impedance Spectroscopy technique for characterizing anticorrosive coatings
Carbon Catalysts for Liquid Phase Reactions
Test method development for textile helix cord angle analysis
The use of antisense nucleic acid mimics for suppressing microRNAs involved in Gastric Cancer
Development of nanostructured carbon spheres for environmental applications
Thermodynamic Analysis of Waste Cooking Oil Steam Reforming
Publicado em: (2027)
Publicado em: (2027)
Experimental and Numerical Studies on Topology of Mixing
Scheduling of a multi-product batch process in the chemical industry with deteriorating effects.
Publicado em: (2026)
Publicado em: (2026)
Characterization of Fuel Cells Power Demand in Vehicles
Hydrogen production through chemical looping reforming of olive mill wastewater: Thermodynamic analysis and comparison with conventional process
Development of PEM Technology for Renewable Energy Systems: Electrolyzers and Regenerative Fuel Cells
Publicado em: (2026)
Publicado em: (2026)
The Applicability of REACH Regulations at Castelbel
Publicado em: (2027)
Publicado em: (2027)
Microwave-assisted Fenton's oxidation of amoxicillin
Design and application of nucleic acid mimics oligonucleotides (NAMs) in combination with nanoparticles for detection and/or growth inhibition of microorganisms
3D Printed Negative Moulds for Soft Lithography Microfluidics
Numerical studies on mixing mechanisms in reactive extrusion
Publicado em: (2027)
Publicado em: (2027)
Registos relacionados
- Treatment of textile effluents by the heterogeneous Fenton process in a continuous packed-bed reactor using Fe/activated carbon as catalyst
- pH infuence on oxygen mass transfer coeficient in a bubble column. Individual characterisation of kL and a
- Diffusion cloud around and downstream of active sphere immersed in granular bed through which fluid flows
- Direct CO2 hydrogenation to methane or methanol from post-combustion exhaust streams - A thermodynamic study
- Tailoring the Ti surface via electropolishing nanopatterning as a route to obtain highly ordered TiO2 nanotubes
Um serviço digital da FCT