Publication
Microwave-assisted Fenton's oxidation of amoxicillin
| Summary: | Advanced oxidation processes (AOPs) have been increasingly applied to emergent pollutants degradation. Although, homogeneous reaction by classical Fenton enables amoxicillin degradation, high iron catalyst concentrations are needed, raising environmental concerns. This work proposed an innovative and cheap solution to degrade amoxicillin by combining microwave with Fenton's reaction. The main operational parameters were optimized step-by-step (hydrogen peroxide and ferrous ion concentration and microwave power). Amoxicillin oxidation was significantly improved over classical Fenton's reaction. In fact, in less than 5 min (P = 162 W, [H2O2](0) = 2.35 mg L-1, [Fe2+](0) = 95 mu g L-1) amoxicillin was no longer detected in the reaction system. A semi-empirical kinetic model was proposed to predict the two-stage decay curves at any conditions within the studied parameters and the adequacy of the model was statistically evaluated. |
|---|---|
| Subject: | Chemical engineering Engenharia química |
| Country: | Portugal |
| Document type: | journal article |
| Access type: | Restricted |
| Associated institution: | Repositório Aberto da Universidade do Porto |
| Language: | English |
| Origin: | Repositório Aberto da Universidade do Porto |
Similar Items
Treatment of textile effluents by the heterogeneous Fenton process in a continuous packed-bed reactor using Fe/activated carbon as catalyst
Ceria Nanoparticles Shape Effects on the Structural Defects and Surface Chemistry: Implications in CO oxidation by CuO/CeO2 oxides
Composite Grapheno-Metal Oxide Platelet Method of Preparation and Applications
Production of C4 Dicarboxylic Acids From Lignin Oxidation
1-Octanol/water partition coefficients of n-Alkanes from molecular simulations of absolute solvation free energies
pH infuence on oxygen mass transfer coeficient in a bubble column. Individual characterisation of kL and a
Biodiesel production from vegetable frying oil and ethanol using enzymatic catalysis
Direct CO2 hydrogenation to methane or methanol from post-combustion exhaust streams - A thermodynamic study
Tailoring the Ti surface via electropolishing nanopatterning as a route to obtain highly ordered TiO2 nanotubes
Effect of the integration method on the accuracy and computational efficiency of free energy calculations using thermodynamic integration
Methanol steam reforming for hydrogen generation via conventional and membrane reactors: A review
Boehmite-Phenolic Resin Carbon Molecular Sieve Membranes - Permeation and Adsorption Studies
Laccase immobilization over multi-walled carbon nanotubes: Kinetic, thermodynamic and stability studies
Protein Separation and Purification by Cyclic Adsorption Processes
Published: (2026)
Published: (2026)
Cluster Analysis of Crude Oils for Refining and Quality Control based on Physicochemical Properties, Proton Nuclear Magnetic Resonance and Gas Chromatography
Published: (2025)
Published: (2025)
Rehabilitation Project for an Energy Autonomous House
Decyl acetate synthesis by enzyme catalysis in scCO2 (Keynote Presentation)
Study of Mechanical and Thermal Properties of Rubberised and Dipped Tire Cords
Use of Electrochemical Impedance Spectroscopy technique for characterizing anticorrosive coatings
Carbon Catalysts for Liquid Phase Reactions
Removal of organic and inorganic pollutants from water in continuous catalytic systems
Published: (2028)
Published: (2028)
Numerical simulation study on the heat loss from a thermal foot manikin
Test method development for textile helix cord angle analysis
The use of antisense nucleic acid mimics for suppressing microRNAs involved in Gastric Cancer
Mass transfer from cylinders and plane surfaces buried in packed beds in alignment with the flow direction
Development of nanostructured carbon spheres for environmental applications
Thermodynamic Analysis of Waste Cooking Oil Steam Reforming
Published: (2027)
Published: (2027)
Experimental and Numerical Studies on Topology of Mixing
Scheduling of a multi-product batch process in the chemical industry with deteriorating effects.
Published: (2026)
Published: (2026)
Characterization of Fuel Cells Power Demand in Vehicles
Hydrogen production through chemical looping reforming of olive mill wastewater: Thermodynamic analysis and comparison with conventional process
Development of PEM Technology for Renewable Energy Systems: Electrolyzers and Regenerative Fuel Cells
Published: (2026)
Published: (2026)
The Applicability of REACH Regulations at Castelbel
Published: (2027)
Published: (2027)
Design and application of nucleic acid mimics oligonucleotides (NAMs) in combination with nanoparticles for detection and/or growth inhibition of microorganisms
3D Printed Negative Moulds for Soft Lithography Microfluidics
Development of a microalgae-bacteria system to remove emerging contaminants from wastewater
Published: (2028)
Published: (2028)
Diffusion cloud around and downstream of active sphere immersed in granular bed through which fluid flows
Numerical studies on mixing mechanisms in reactive extrusion
Published: (2027)
Published: (2027)
Optimization of CO₂ and CO Separation by VPSA for Applications in CO₂ Electrolysis
Published: (2028)
Published: (2028)
CFD Analysis of a Plate Cooling System for Plastic Moulds
Published: (2028)
Published: (2028)
Similar Items
- Treatment of textile effluents by the heterogeneous Fenton process in a continuous packed-bed reactor using Fe/activated carbon as catalyst
- Ceria Nanoparticles Shape Effects on the Structural Defects and Surface Chemistry: Implications in CO oxidation by CuO/CeO2 oxides
- Composite Grapheno-Metal Oxide Platelet Method of Preparation and Applications
- Production of C4 Dicarboxylic Acids From Lignin Oxidation
- 1-Octanol/water partition coefficients of n-Alkanes from molecular simulations of absolute solvation free energies
A digital service from FCT