Um serviço digital da FCT Publicação
Tailoring the Ti surface via electropolishing nanopatterning as a route to obtain highly ordered TiO2 nanotubes
| Resumo: | Highly ordered TiO2 nanotubes (NTs) were synthesized by the electrochemical anodization of Ti foils subjected to electropolishing (EP) pre-treatment. We found that the Ti surface roughness plays an important role in the onset of pore nucleation in enhancing the local focusing effect of the electrical field. Additionally, EP induces the formation of dimple structures on the metal surface, which can work as a pre-pattern prior to anodization. These shallow ripples lead to a preferentially ordered pore nucleation, offering an organizational improvement of the anodic oxide NTs. We found that, depending on the EP applied potential, the roughness and the spatial period of the ripple-like structures varies from 82 nm and from 12230 nm, respectively. Such tuning allowed us to focus on the influence of the initial Ti pre-surface topography features on the NTs length, organization, and hexagonal arrangement quality, as well as diameter and density. Our results show that an EP under 10 V is the most suitable to obtain a small Ti surface roughness, the largest NT length (40% enhancement), and the effective improvement of the ordered hexagonal NTs arrays over larger areas. Furthermore, the NTs dimensions (pore diameters and density) were also found to depend on the initial Ti surface topography. The use of optimized EP allows us to obtain highly hexagonal self-ordered samples at a reduced time and cost. |
|---|---|
| Assunto: | Chemical engineering, Chemical engineering Engenharia química, Engenharia química |
| País: | Portugal |
| Tipo de documento: | journal article |
| Tipo de acesso: | Restrito |
| Instituição associada: | Repositório Aberto da Universidade do Porto |
| Idioma: | inglês |
| Origem: | Repositório Aberto da Universidade do Porto |
| _version_ | 1850560650404691968 |
|---|---|
| conditionsOfAccess_str | restricted access |
| country_str | PT |
| description | Highly ordered TiO2 nanotubes (NTs) were synthesized by the electrochemical anodization of Ti foils subjected to electropolishing (EP) pre-treatment. We found that the Ti surface roughness plays an important role in the onset of pore nucleation in enhancing the local focusing effect of the electrical field. Additionally, EP induces the formation of dimple structures on the metal surface, which can work as a pre-pattern prior to anodization. These shallow ripples lead to a preferentially ordered pore nucleation, offering an organizational improvement of the anodic oxide NTs. We found that, depending on the EP applied potential, the roughness and the spatial period of the ripple-like structures varies from 82 nm and from 12230 nm, respectively. Such tuning allowed us to focus on the influence of the initial Ti pre-surface topography features on the NTs length, organization, and hexagonal arrangement quality, as well as diameter and density. Our results show that an EP under 10 V is the most suitable to obtain a small Ti surface roughness, the largest NT length (40% enhancement), and the effective improvement of the ordered hexagonal NTs arrays over larger areas. Furthermore, the NTs dimensions (pore diameters and density) were also found to depend on the initial Ti surface topography. The use of optimized EP allows us to obtain highly hexagonal self-ordered samples at a reduced time and cost. |
| documentTypeURL_str | http://purl.org/coar/resource_type/c_6501 |
| documentType_str | journal article |
| id | 14a7efc3-e1d7-441f-b3aa-e79747ec5290 |
| identifierHandle_str | https://hdl.handle.net/10216/82493 |
| language | eng |
| relatedInstitutions_str_mv | Repositório Aberto da Universidade do Porto |
| resourceName_str | Repositório Aberto da Universidade do Porto |
| spellingShingle | Tailoring the Ti surface via electropolishing nanopatterning as a route to obtain highly ordered TiO2 nanotubes Chemical engineering, Chemical engineering Engenharia química, Engenharia química |
| title | Tailoring the Ti surface via electropolishing nanopatterning as a route to obtain highly ordered TiO2 nanotubes |
| topic | Chemical engineering, Chemical engineering Engenharia química, Engenharia química |